Basic operation of the AW2400
35
AW2400 Owner’s Manual
Introducing the AW2400
2
4
If you want more precise editing control over the parame-
ter selected in step 2, above, press the corresponding
SELECTED CHANNEL knob (1–4) to call up the screen
containing the related parameters.
5
Move the cursor in the screen to the desired parameter,
and use the [DATA/JOG] dial or the [ENTER] key to oper-
ate the parameter.
Selected Key (Lit) Knob 1 Knob 2 Knob 3 Knob 4
[DYN] DYNAMICS Screen DYNAMICS Screen DYNAMICS Screen DYNAMICS Screen
[AUX] AUX1 Screen AUX2 Screen AUX3 Screen AUX4 Screen
[EFFECT] EFFECT1 Screen EFFECT2 Screen EFFECT3 Screen EFFECT4 Screen
[PAN/EQ] PAN/EQ Screen PAN/EQ Screen PAN/EQ Screen PAN/EQ Screen
• The display will not change if the SELECTED CHANNEL knob is simply rotated.
To switch screens the knobs must be pressed.
• Other gate functions can be accessed via the DYNAMICS screen, but only
pages and parameters related to compressor operation can be accessed via the
SELECTED CHANNEL knobs.
NOTE
