Filter
Top Products
AW2400 Owner’s Manual
Pairing channels
Track recording
58
6
Adjacent odd- and even-numbered input channels (1/2–15/16), track channels (1/2–23/24), and
AUX send master channels (1/2 and 3/4) can be set as pairs. When channels are paired most of
their parameters are linked for optimum efficiency and easy when handling stereo signals.
Channels can be set as pairs either via the MONITOR screen or by using the panel [INPUT SEL]
or [SEL] keys.
1
Call the MONITOR screen Pair page by
either pressing the Quick Navigate section
[MONITOR] key as many times as neces-
sary, or by pressing the [F1] key after
pressing the [MONITOR] key.
This page contains the following items.
1 INPUT field
Pairs or disengages pairing for input channels 1–16.
B TRACK field
Pairs or disengages pairing for track channels 1–24.
C AUX OUT field
Pairs or disengages pairing for AUX send channels 1–
4.
D MONOx2 buttons
Indicate that the adjacent channels are functioning as
independent mono channels.
E STEREO buttons
Indicate that the two channels are functioning as a ste-
reo pair.
2
Move the cursor to the MONOx2 button of a
channel you want to assign as a stereo pair
and press the [ENTER] key.
A pairing confirmation popup window will appear.
The popup window contains the following items.
• INPUT (TRACK, AUX OUT) x → y
(x= odd number, y= even number)
.................. Copy the settings of channel x
to y, and pair them.
• INPUT (TRACK, AUX OUT) y →x
(x= odd number, y= even number)
.................. Copy the settings of channel y
to x, and pair them.
• RESET BOTH ....... Initialize both channels, and
pair them.
• CANCEL ............... Cancel pairing.
3
Move the cursor to the appropriate button
in the popup window and press the
[ENTER] key.
The MONOx2 button will change to a STEREO but-
ton. The following parameters are linked for paired
channels.
● Input Channels
All mix parameters other than the [GAIN] knob and
phase/pan settings.
● Track Channels
All mix parameters other than the phase/pan settings.
● AUX Send Master Channels
All mix parameters.
Pairing channels
• When channels are paired always operate only the fader of one channel. Attempting to
operate both faders at once can result in damage to the faders’ motor drive system.
NOTE
■ Pairing Channels via
the MONITOR Screen
DE
B
C
A