Filter
Top Products
AW2400 Owner’s Manual
Effect Library Operations
Effects
122
14
The AW2400 provides an effect library for storage and recall of effect settings. Effect library oper-
ation is described in this section.
Effect library save and recall operations are carried out via
the EFFECT screen FX Lib. page.
1
Press the Selected Channel section
[EFFECT] key so that its indicator lights.
The EFFECT screen will appear.
2
Press one of the Selected Channel section
knobs 1–4.
The corresponding EFFECT screen will appear.
3
Press the [F4] key to access the FX Lib.
page.
All effect library operations are carried out via the FX
Lib. page. The items in this page are as follows.
1 Current effect information
This is the same as the EFFECT screen FX Edit page
(→ p. 121).
B RENAME button
Accesses the NAME EDIT popup window, where you
can edit the name of the library selected in the list.
C RECALL button
Recalls the library data that is selected in the list.
Refer to “Recalling Effect Library settings” on
page 116 for details on recalling from the library.
D STORE button
Stores the current effect settings into the location
selected in the list.
E CLEAR button
Deletes the library data that is selected in the list.
F List
This area lists the effect data stored in the library.
Library numbers 001–043 are read-only, and original
settings can be saved to numbers 044–128. The line
enclosed by the dotted frame indicates the data that is
selected for operation. An icon indicates a read-
only library setup.
Here’s how you can change the names of the settings in
the Effect library.
1
Call the FX Lib. page.
Refer to “Call the Effect Library Screen” on page 122
for details.
2
Move the cursor to the list, and use the
[DATA/JOG] dial or [INC]/[DEC] keys to
select the library setting to be edited.
The setting highlighted by a dotted frame is currently
selected for editing.
3
Move the cursor to the RENAME button and
press the [ENTER] key.
The NAME EDIT popup window will appear.
4
Enter a name for the selected library set-
ting, move the cursor to the OK button, and
press the [ENTER] key (refer to page 32 for
details on name entry).
This confirms and enters the new name.
Effect Library Operations
Call the Effect Library Screen
• The Effect Library is common to all four internal effect proces-
sors, so save and recall operations can be carried out from
any EFFECT screen.
HINT
A
B
C
D
E
F
Changing Effect Library Names
• Pressing the [F4] key while holding the Display section
[SHIFT] key has the same effect as the RENAME button.
HINT