Filter
Top Products
Editing Effects
121
AW2400 Owner’s Manual
Effects
14
The AW2400 internal effect parameters can be edited to create precisely the effect your music
requires.
1
Referring to the instructions in “Recalling
Effect Library settings” on page 116, recall
an effect library preset that is based on the
effect type you want to use.
2
Make sure that the Selected Channel sec-
tion [EFFECT] key is engaged and its indi-
cator is lit.
3
Make sure that the EFFECT screen selected
in step 1 is showing.
Selected Channel knobs 1–4 correspond to EFFECT
screens 1–4. Press the appropriate knob to call the
desired screen.
4
Press the Display section [F3] key to
access and edit the effect parameters.
The EFFECT screen FX Edit page will appear.
This page contains the following items.
1 NAME
Indicates the name of the currently selected effect.
B TYPE
Indicates the type of the currently selected effect.
C MIX BALANCE field
• BYPASS button............Switches effect bypass on/
off.
• MIX BALANCE knob....Sets the balance between
the effect and direct sig-
nals. 0% produces direct
sound only, while 100%
produces effect sound only.
D USED AS
Indicates how this effect is being used. “EFF1”–
“EFF4” indicate that the effect is internally connected
to the mixer section via send/return. If the effect is
inserted into a specific channel the name of the chan-
nel into which the effect is inserted will be shown
(e.g., “INPUT 1”).
E Level Meter
Displays the effect input or output level. Select input
(IN) or output (OUT) via the button above the meters.
F Parameter page
In this area you can edit the various effect parameters.
The content and range of the parameters will depend
on the currently selected effect type.
5
Move the cursor to the effect parameter that
you want to edit, and use the [DATA/JOG]
dial or [INC]/[DEC] keys to edit the value.
Depending on the effect type, this area may be used to
show multiple parameter pages. In this case repeatedly
press the CURSOR [ ] key to access the parameter
page that contains the parameter you want to edit.
6
To switch effect BYPASS on/off, move the
cursor to the BYPASS button and press the
[ENTER] key.
Editing Effects
B DCA
E
F
•You cannot change the effect type via this page. If you want to
use a different type you will need to recall a library setting that
uses the desired effect type.
NOTE
• Edited effect settings can be stored in the effect library (
→
p. 123).
HINT