Filter
Top Products
AW2400 Owner’s Manual
Using the MIDI Remote function
MIDI
208
20
3
Select the preset you want to use in the
MODE box and press the [ENTER] key.
For example if you select preset “XG 1-16”, the
AW2400’s faders will control the volume of parts 1–
16 of your XG tone generator, and [ON] keys 1–16
will control the on/off status of parts 1–16.
4
If necessary, select the REMOTE screen 1–
12 or 13–16 pages and set the MIDI channel
assignments to the faders and [ON] keys as
required.
The MIDI channel assignments on each page are
described in “Using the MIDI Remote function pre-
sets” on page 204.
5
Operate the AW2400 faders and [ON] keys.
The messages assigned to the faders and [ON] keys
will be transmitted via the MIDI OUT/THRU connec-
tor, and the parameters of your tone generator module
will change accordingly.