Filter
Top Products
113
EFFECT DATA COPY
[VOICE] → [EFFECT EDIT] → [COPY]
This function facilitates voice effect editing by allowing the effect parameters
from any other song, voice, or performance combination to be copied to the current
voice. You can copy an effect setup that is close to the type you want, then edit it to
produce the required sound.
VOICE EDIT MODE / EFFECT EDIT
From Voice
Range: Any song, voice or performance combination
Controls: MEMORY, GROUP, PROGRAM, [CS4], [CS5], [-1] [+1], Dial
Use the [CS4] slider to select the mode containing the desired voice and
effect data (“PFM” = PERFORMANCE, “VCE” = VOICE, and “MLT” =
MULTI). Use the [INTERNAL 1], [INTERNAL 2], and [CARD] MEMORY
keys to select the memory area from which the source voice is to be selected.
Use the GROUP keys to select the source voice bank, then use the PROGRAM
keys to select the source voice number. The [CS5] slider and other data entry
controls can also be used to select the source voice number.
Once the source voice has been selected, press the [ENTER/YES] key. “Are
you sure?” will appear on the display.
Press the [ENTER/YES] key again to copy the effect data, or press [EXIT/
NO] to cancel the copy operation. Once the copy operation has finished, “Com-
pleted!” will appear on the display briefly, then the display will return to the
effect edit mode.
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8