Yamaha SY85 Musical Instrument User Manual


 
210 UTILITY MODE / SYNTH SETUP
This screen includes several parameters that affect overall operation of the SY85.
1: SYSTEM
[UTILITY] [SYNTH SETUP] [MENU] 1:System [ENTER/YES]
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8
NtShft (Note shift)
Range: -63 +63
Controls: [CS4], [-1] [+1], Dial,
Shifts the overall pitch of the SY85 up or down in semitone steps.
A setting of “-12,” for example, shifts the pitch down by one octave; a
setting of “+4” shifts the pitch up by a major third.
Tune (Master tuning)
Range: -63 +63
Controls: [CS5], [-1] [+1], Dial,
Fine tunes the overall pitch of the SY85 in approximately 1.17-cent steps (a
“cent” is 1/100th of a semitone).
The maximum minus setting of “-63” produces a downward pitch shift of
almost three-quarters of a semitone, and the maximum plus setting of “+63”
produces an upward pitch shift of the same amount. A setting of “0” produces
no pitch change.
CtrlRst (Control reset)
Range: off, on
Controls: [CS7], [-1] [+1], Dial
Determines whether controller settings (modulation wheel, pitch bend,
breath controller, foot controller, etc.) are held (“off”) or reset (“on”) when
voices or multi-play setups are switched.
If this function is set to “off,” then if, for example, you have applied modu-
lation to a voice via the modulation wheel and switch to a new voice while
maintaining the same modulation wheel position, then the same amount of
modulation will be applied to the new voice. If “on” is selected, than all con-
troller values are reset when a new voice or multi-play setup is selected.