Filter
Top Products
204
Allows a specified instrument (key) in one or all patterns to be changed to any
other. This makes it possible to change all occurences of one instrument to a different
instrument in one easy step.
3: INSTRUMENT CHANGE
[PATTERN] → [JOB] → [MENU] → 3:Inst Change → [ENTER/YES]
PATTERN EDIT MODE / PATTERN JOB
PTN, ALL
Range: PTN, ALL
Controls: [F1], [F2]
Ptn (Pattern number)
Range: 00 … 99
Controls: [CS6], [-1] [+1], Dial
From
Range: C1 … C6
Controls: [CS7], [-1] [+1], Dial, Keyboard
To
Range: C1 … C6
Controls: [CS8], [-1] [+1], Dial, Keyboard
Press [F1] if you want to change an instrument in one pattern, or [F2] if
you want to change an instrument in all patterns. If you select “PTN”, the
current pattern name is shown between parentheses on the lower display line
and [CS6] can be used to select the pattern in which an instrument is to be
changed. Use [CS7] (“From”) to select the key corresponding to the instrument
to be changed, and [CS8] (“To”) to select the key corresponding to the new
instrument. The “From” and “To” keys can also be directly specified via the
keyboard when the cursor is located at the corresponding parameter.
Press [ENTER/YES] to begin the instrument change procedure. The follow-
ing confirmation display will appear:
Press [ENTER/YES] again to confirm that you want to go ahead with the
instrument change operation, or press [EXIT/NO] to cancel.
When the instrument has been changed, “Completed!” will appear briefly on
the display, then the display will return to the pattern play mode.
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8