Filter
Top Products
213UTILITY MODE / SYNTH SETUP
More MIDI parameters that determine how the SY85 responds to external MIDI
control.
3: MIDI 2 (OTHER PARAMETERS)
[UTILITY] → [SYNTH SETUP] → [MENU] → 3:MIDI 2 → [ENTER/YES]
VolCtrl (Volume control device)
Range: 000 … 121
Controls: [CS4], [-1] [+1], Dial
Sets a MIDI control number via which the overall volume of the SY85 can
be controlled.
PC (Program change type)
Range: off, norm, drct, tbl
Controls: [CS5], [-1] [+1], Dial
Determines whether the SY85 will respond to MIDI program change mes-
sages for remote voice/performance selection.
The “off” setting turns MIDI program change reception off, so operating the
voice selectors on an external controller will not cause the corresponding SY85
voice or performance setup to be selected.
In the “norm” (normal) mode, program change numbers 0 through 63 select
SY85 voices or performance combinations 1 through 64, depending on the
current mode.
The “drct” (direct) mode allows, in addition to the voice and performance
selection of the “norm” mode, selection of the various SY85 modes by recep-
tion of the MIDI program bank change messages listed below.
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8