Filter
Top Products
39PERFORMANCE EDIT MODE / EFFECT EDIT
Send (Send level)
Range: 0 … 127
Controls: [CS6], [-1] [+1], Dial
This parameter adjusts the amount of direct voice signal that is sent to the
effect processors, determining the strength of the final effect sound. A setting
of “0” results in no effect, leaving only the “dry” sound of the voice. The
maximum setting of “127” produces the maximum amount of effect.
VelS (Send velocity sensitivity)
Range: -7 … +7
Controls: [CS7], [-1] [+1], Dial
Determines how the send level from the selected layer is affected by veloc-
ity changes (e.g. keyboard dynamics).
Plus “+” settings produce higher send levels in response to higher velocity
values — i.e. the harder a key is played, the higher the send level, and there-
fore the deeper the effect. The maximum setting of “+7” produces the maxi-
mum level variation in response to velocity changes. Minus “-” settings produce
the opposite effect: lower send level in response to higher velocity. A setting of
“+0” results in no send level variation.
Kscl (Send key scaling)
Range: -7 … +7
Controls: [CS8], [-1] [+1], Dial
Allows the send level for the selected layer to be varied across the entire
pitch range (i.e. keyboard range).
Plus (“+”) settings produce a higher send level for the low notes and a
lower send level for the high notes. The maximum “+7” setting produces the
greatest send level variation across the pitch range. Minus (“-”) settings pro-
duce the opposite effect — a lower low-note send level and higher high-note
send level. A setting of “+0” results in no send level variation.