Yamaha SY85 Musical Instrument User Manual


 
148 SONG EDIT MODE / MULTI EDIT
Each SY85 “song” has an independent “multi setup” that can have up to 16
voices assigned to “instruments” 1 through 16. Each instrument is controlled via the
correspondingly numbered MIDI channel. This screen lets you select the voices that
are to be played via the various multi-setup channels.
1: VOICE SELECT
[SONG] [MULTI EDIT] [MENU] 1:Voice Select [ENTER/YES]
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8
Voice Select 1… 16
Range: off, Any voice or performance combination.
Controls: [SHIFT] + [ ]/[ ], MEMORY, GROUP, PROGRAM, [CS1] …
[CS8], [-1] [+1], Dial
Only eight voice numbers are shown on the display at one time. Use the
PAGE [ ] and [ ] keys while holding the [SHIFT] key to switch between
multi instruments “1 … 8” and “9 … 16”. The currenty selected group of
voices is indicated on the upper display line.
After moving the cursor to the instrument you want to edit by pressing the
appropriate function key, use the same function key to toggle between PER-
FORMANCE or VOICE memory (“P” or “V” at the beginning of the voice
number). Then use the [INTERNAL 1], [INTERNAL 2], and [CARD] keys to
select the memory area from which the voice is to be selected, and finally the
GROUP and PROGRAM keys to select the voice. Voices within the selected
memory bank can also be selected directy for each channel by the appropriate
CS sliders, the data entry dial, and the [-] and [+] keys.
The voices can individually turned on or off by using the [-] (off) and [+]
(on) keys while holding the [SHIFT] key.
The name of the currently selected voice is shown in the upper right corner
of the display.