Filter
Top Products
23PERFORMANCE EDIT MODE / 1:Layer
LAYER DATA COPY
[PERFORMANCE] → [EDIT] → [MENU] → 1:Layer → [ENTER/YES] → [COPY]
This function facilitates performance editing by allowing the layer parameters
from any layer in any other performance (the “source” performance) to be copied to
the current layer. You can copy a layer setup that is close to the type you want, then
edit it to produce the required sound.
From Performance
Range: Any INTERNAL or CARD performance
Controls: MEMORY, GROUP, PROGRAM, [CS5], [-1] [+1], Dial
Layer
Range: A, B, C, D
Controls: [CS8], [-1] [+1], Dial
Use the [INTERNAL 1], [INTERNAL 2], and [CARD] MEMORY keys to
select the memory area from which the source performance is to be selected.
Use the GROUP keys to select the source performance bank, then use the
PROGRAM keys to select the source performance number. The [CS5] slider
and other data entry controls can also be used to select the source performance
number. Use the [CS8] slider to select the source layer.
Once the source performance and layer has been selected, press the [EN-
TER/YES] key. “Are you sure?” will appear on the display.
Press the [ENTER/YES] key again to copy the layer data, or press [EXIT/
NO] to cancel the copy operation. Once the copy operation has finished, “Com-
pleted!” will appear on the display briefly, then the display will return to the
layer edit mode.
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8