Filter
Top Products
241
From/To
Range: 00 … 63
Controls: [CS4]/[CS5], [-1] [+1], Dial
Press [F1] to turn wave assignment on. If wave assignment is turned off, “-
--” appears in place of the “From” and “To” parameters. Use [CS4] and [CS5]
to specify the range of samples to be assigned to the waveform. [CS4] specifies
the first sample (“From”) and [CS5] specifies the last sample (“To”) in the
range to be assigned. If both the “From” and “To” parameters are set to the
same sample number, then only that sample is assigned to the waveform. If, for
example, “From” is set to “2” and “To” is set to “5”, then sample numbers 2,
3, 4, and 5 are assigned to the waveform.
● 2: WAVE NAME
If not already selected, press the PAGE [ ] key to select this screen.
This function can be used to assign a name of up to 8 characters to the
current sample.
Name
Range: See character list, below
Controls: GROUP, PROGRAM, [F1] … [F4], [F7], [F8],
[CS1] … [CS8], [-1] [+1], Dial
Use the [F7] function key to move the character cursor to the left, and the
[F8] function key to move the cursor to the right. Use the GROUP and PRO-
GRAM keys to input a character at the cursor position. Each GROUP or PRO-
GRAM key selects the three characters printed above it in sequence. It is also
possible to use the [-1] and [+1] keys or dial to scroll through the available
characters (see list below).
The sliders, [CS1] through [CS8], independently select characters for the
corresponding character position: [CS1] selects the first character, [CS2] selects
the second character, and so on.
The first four function keys also perform important functions: [F1] clears
the entire name, [F2] selects upper-case characters for GROUP and PROGRAM
key entry, [F3] selects lower-case characters for GROUP and PROGRAM key
entry, and [F4] inserts a space at the cursor position.
WAVE EDIT MODE / EDIT
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8