Filter
Top Products
167SONG EDIT MODE / SONG EFFECT
The parameters provided here determine to which of the SY85 effect stages the
output from the voice assigned to each layer is sent, and at what level. It is also
possible to control the effect send level via keyboard dynamics and key scaling.
2: SEND SELECT & LEVEL
[SONG] → [EFFECT EDIT] → [MENU] → 2:Send → [ENTER/YES]
Inst (Instrument)
Range: 1 … 16
Controls: [CS2], [-1] [+1], Dial
Selects the multi instrument to be edited. The name of the voice assigned to
the selected instrument is shown between parentheses on the upper line of the
display.
Source
Range: MLT, VCE, PFM
Controls: [CS5], [-1] [+1], Dial
When “MLT” is selected the “Switch” and “Levl” parameters, described
below, can be applied to the selected instrument. If a voice is assigned to the
selected instrument, the “Source” parameter can also be set to “VCE”, causing
the switch and send levels of the assigned voice to be used. In the same way,
if a performance combination is assigned to the selected instrument, the
“Source” parameter can be set to “PFM”, causing the switch and send levels of
the assigned performance combination to be used. If “VCE” or “PFM” is se-
lected, the “Switch” and “Levl” parameters cannot be edited (“----” appears in
place of the parameters).
Switch 1a, 1b/2a, 2b
Range: See text below.
Controls: [CS6]/[CS7], [-1] [+1], Dial
Determines to which of the EFFECT 1 and EFFECT 2 effect stages the
output from the current layer is sent. Each time the [F6] or [F7] function key is
pressed, the cursor alternately moves to the corresponding “a” or “b” parameter.
The [-1] and [+1] keys can then be used to turn the stage on (“a” or “b”) or
off (“.”). The [CS6] and [CS7] sliders select the following settings in sequence:
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8