Filter
Top Products
192 SONG EDIT MODE / SONG JOB
Erases all note and event data from the specified measure or range of measures in
the specified track.
This job is not available when the rhythm track (track 9) is selected.
10: ERASE MEASURE
[SONG] → [A]~[H] → [SONG JOB] → [MENU] → 10:Erase Measure → [ENTER/YES]
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8
Meas (First & last measure numbers)
Range: 001 … 999
Controls: [CS7], [CS8], [-1] [+1], Dial
Use the GROUP [A] through [H] keys to select the track containing the
measures you want to erase (A = track1, B = track 2, and so on). The LED of
the selected track will glow red while the LEDs of all other tracks containing
data glow green.
Use the [CS7] and [CS8] sliders to select the numbers of the first and last
measures in the range of measures you want to erase.
Press [ENTER/YES] to begin the erase procedure. The following confirma-
tion display will appear:
Press [ENTER/YES] again to confirm that you want to go ahead with the
erase operation, or press [EXIT/NO] to cancel.
When the data has been erased, “Completed!” will appear briefly on the
display.
An erase operation leaves the specified measures intact but blank.