Yamaha SY85 Musical Instrument User Manual


 
197SONG EDIT MODE / SONG JOB
Shifts all occurences of the specified note in the specified track and range of
measures to any other note.
This job is not available when the rhythm track (track 9) is selected.
14: NOTE SHIFT
[SONG] [A]~[H] [SONG JOB] [MENU] 14:Note Shift [ENTER/YES]
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8
Meas (First & last measure numbers)
Range: 001 999
Controls: [CS5], [CS6], [-1] [+1], Dial
From (Original note)
Range: C-2 G8
Controls: [CS7], [-1] [+1], Dial, Keyboard
To (New note)
Range: C-2 G8
Controls: [CS8], [-1] [+1], Dial, Keyboard
Use the GROUP [A] through [H] keys to select the track on which the note
shift operation is to be performed (A = track1, B = track 2, and so on). The
LED of the selected track will glow red while the LEDs of all other tracks
containing data glow green.
Use [CS5] and [CS6] to specify the first and last measure numbers in the
range of measures over which you want to shift note data. Use [CS7] to specify
the note that is to be shifted (or press the appropriate key on the keyboard after
moving the cursor to the “From” parameter by pressing the [F7] key), and use
[CS8] or the keyboard to specify the new note to which all occurrences of the
“From” note are to be shifted.
Press [ENTER/YES] to begin the note shift procedure. The following con-
firmation display will appear:
Press [ENTER/YES] again to confirm that you want to go ahead with the
note shift operation, or press [EXIT/NO] to cancel.
When the notes have been shifted, “Completed!” will appear briefly on the
display.