Filter
Top Products
38 PERFORMANCE EDIT MODE / EFFECT EDIT
The parameters provided here determine to which of the SY85 effect stages the
output from the voice assigned to each layer is sent, and at what level. It is also
possible to control the effect send level via keyboard dynamics and key scaling.
2: SEND SELECT & LEVEL
[PERFORMANCE] → [EFFECT EDIT] → [MENU] → 2:Send → [ENTER/YES]
Layer
Range: A, B, C, D
Controls: [CS2], PROGRAM [1] … [4], [-1] [+1], Dial
Selects the layer to be edited. The name of the voice assigned to the se-
lected layer is shown between parentheses on the upper line of the display.
Switch 1a, 1b/2a, 2b
Range: See text below.
Controls: [CS4]/[CS5], [-1] [+1], Dial
Determines to which of the EFFECT 1 and EFFECT 2 effect stages the
output from the current layer is sent. The [-1] and [+1] keys can then be used
to turn the stage on (“a” or “b”) or off (“.”). The [CS4] and [CS5] sliders
select the following settings in sequence:
CS4 (EFFECT 1) CS5 (EFFECT 2)
1./. (a and b off) 2./. (a and b off)
1a/. (a on, b off) 2a/. (a on, b off)
1a/b (a and b on) 2a/b (a and b on)
1./b (a off, b on) 2./b (a off, b on)
If a “single” type effect is selected then only stage “a” can be selected. If a
“dual” or “cascade” type effect is selected, then both stages “a” and “b” can be
selected. An effect stage that cannot be selected is represented by “-” on the
display.
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8