Filter
Top Products
196 SONG EDIT MODE / SONG JOB
Transposes all notes in the specified track and range of measures up or down by
the specified “offset” in semitones.
This job is not available when the rhythm track (track 9) is selected.
13: TRANSPOSE
[SONG] → [A]~[H] → [SONG JOB] → [MENU] → 13:Transpose → [ENTER/YES]
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8
Meas (First & last measure numbers)
Range: 001 … 999
Controls: [CS6], [CS7], [-1] [+1], Dial
Ofst (Offset)
Range: -99 … +99
Controls: [CS8], [-1] [+1], Dial
Use the GROUP [A] through [H] keys to select the track on which the
transpose operation is to be performed (A = track1, B = track 2, and so on).
The LED of the selected track will glow red while the LEDs of all other tracks
containing data glow green.
Use [CS6] and [CS7] to specify the first and last measure numbers in the
range of measures over which you want to transpose note data. Use [CS8] to
set the number of semitones by which the notes will be transposed up or down.
Minus (-) values transpose down while plus (+) values transpose up.
Press [ENTER/YES] to begin the transpose procedure. The following confir-
mation display will appear:
Press [ENTER/YES] again to confirm that you want to go ahead with the
transpose operation, or press [EXIT/NO] to cancel.
When the data has been transposed, “Completed!” will appear briefly on the
display.