Filter
Top Products
248 WAVE EDIT MODE / MIDI SAMPLE DUMP
This function initiates reception of MIDI Sample Dump data from an external
MIDI device. Both the MIDI IN and OUT terminals must be connected to the exter-
nal MIDI device, since the SY85 transmits a sample dump request message to initiate
transmission by the external device.
1: SAMPLE DUMP RECEIVE
[SHIFT]+[UTILITY] → [MIDI] → [MENU] → 1:Receive → [ENTER/YES]
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8
Sample
Range: 00 … 99
Controls: [CS3], [-1] [+1], Dial
To
Range: Volatile, Non-vol.
Controls: [CS7], [-1] [+1], Dial
Use [CS3] to select the number of the sample to be received from the
transmitting device, and [CS7] to select the type of memory in which the data
is to be stored (see “Wave Memory Expansion” on page 285 for additional
information about the memory types).
When ready to receive the data, press the [ENTER/YES] key. This initiates
transmission of a sample dump request message, then the SY85 waits for the
sample dump data. The received data is appended to the sample data previously
residing in the SY85 memory.
The [EXIT/NO] key can be used to cancel reception at any time.