Filter
Top Products
264 APPENDIX / EFFECTS
■ Effect Signal Flow Diagrams — Drum Voice, Performance,
and Song Modes
The following diagrams illustrate effect signal flow with different effect
mode and effect type combinations in the drum voice, performance, and song
modes. The “Tone Generator” block has slightly different meanings in each of
these modes:
● Drum Voice
“Tone Generator” corresponds to the output from a single drum/
percussion instrument. The other instruments are mixed into the effect
signal path behind the “Dry1” and “Dry2” parameters or the “Switch”
parameters, as indicated by a star (★) in the diagrams.
● Performance
“Tone Generator” corresponds to the output from a single layer. The
other layers are mixed into the effect signal path behind the “Dry1” and
“Dry2” parameters or the “Switch” parameters, as indicated by a star (★)
in the diagrams.
● Song
“Tone Generator” corresponds to the output from a single multi
instrument. The other instruments are mixed into the effect signal path
behind the “Dry1” and “Dry2” parameters or the “Switch” parameters, as
indicated by a star (★) in the diagrams.
In the diagrams a diamond (◆) indicates an on/off switch parameter, and a
block (■) indicates a continuously variable level or mix parameter. Although
abbreviated in the diagrams, the direct and effect signal paths are stereo.
● EFFECT MODE = off.
The illustrations here are not available.