Filter
Top Products
122
2: KEY PARAMETERS 2
[VOICE] → [EDIT] → [MENU] → 2:Key Param2 → [ENTER/YES]
Key Number
Range: C1 … C5
Controls: [CS1], [-1] [+1], Dial, Keyboard
Selects the the drum key to be edited. In addition to using the [CS1] slider,
data entry dial, and [-1] and [+1] keys, the drum key can be selected by simply
pressing the appropriate key on the keyboard.
AltGrp
Range: off, 1 … 5
Controls: [CS5], [-1] [+1], Dial
Assigns the selected drum key to an “alternate group” numbered between 1
and 5. No two drum keys assigned to the same alternate group number can
sound at the same time. This is most commonly used to create a realistic hi-hat
cymbal effect: the closed and open hi-hat keys are assigned to the same alter-
nate group, so that when the closed hi-hat key is played the open hi-hat sound
is immediately cut off. Turn this parameter “off” if you don’t want the current
drum key to be assigned to any alternate group.
GateTime
Range: short, normal, long, very_long
Controls: [CS6], [-1] [+1], Dial
Sets the length of the note played by the selected drum key to short, nor-
mal, long, or very long. Please note that this parameter will not extend the
length of the waveform assigned to the current drum key, so no change may be
heard even if you select the “very long” gate time for a short wave.
Rvs (Reverse)
Range: off, on
Controls: [CS8], [-1] [+1], Dial
When this parameter is turned “on,” the selected wave is played in reverse.
When Rvs is “on,” the pitch EG “Loop” parameter described on page 75 is
automatically turned “off.”
DRUM VOICE EDIT MODE / DRUM KEY EDIT
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8