Filter
Top Products
83
2: MODULATION WHEEL DEPTH
[VOICE] → [EDIT] → [MENU] → 6:Controller → [ENTER/YES] → [ENTER/YES] →
→ [MENU] → 2:MW Depth → [ENTER/YES]
The modulation wheel can be used to control a wide range of modulation effects.
The parameters provided in this screen set the depth of each effect type.
Amod (Amplitude modulation depth)
Range: 0 … 127
Controls: [CS4], [-1] [+1], Dial
Sets the maximum depth of amplitude modulation (tremolo effects) applied
via the modulation wheel.
A setting of “0” allows no amplitude modulation, while a setting of 127
results in maximum amplitude modulation depth.
When setting up the low-frequency oscillator to apply amplitude modula-
tion, this parameter must be set to a value
other than “0” if amplitude modula-
tion is to be applied via the modulation wheel.
Pmod (Pitch modulation depth)
Range: 0 … 127
Controls: [CS5], [-1] [+1], Dial
Sets the maximum depth of pitch modulation (vibrato effects) applied via
the modulation wheel.
A setting of “0” allows no pitch modulation, while a setting of 127 results
in maximum amplitude modulation.
When setting up the low-frequency oscillator to apply pitch modulation, this
parameter must be set to a value
other than “0” if pitch modulation is to be
applied via the modulation wheel.
VOICE EDIT MODE / 6:Controller
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8