Yamaha SY85 Musical Instrument User Manual


 
174 SONG EDIT MODE / SONG EFFECT
The parameters provided in this screen determine which effect parameters are to
be controlled by the minimum and maximum parameter values and assign MIDI
control numbers to the same parameters for MIDI effect control.
9: CONTROL PARAMETERS
[SONG] [EFFECT EDIT] [MENU] 9:Control Parameter [ENTER/YES]
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8
CTRL1/CTRL2 (CTRL1/CTRL2 switch)
Range: 1, 2
Controls: [CS1], [-1] [+1], Dial
Selects CTRL1 or CTRL2 for assignment.
Parameter (Effect parameter)
Range: Depends on selected effects.
Controls: [CS2], [-1] [+1], Dial
Selects the effect parameter to be controlled by the currently selected slider.
Since each effect has as many as 8 different parameters, the maximum number
of settings available for this parameter will be 8: “Ef1prm1” through “Ef1prm8”
on the display, for example, stands for “effect 1 parameter 1” through “effect 1
parameter 8”. The parameters available for each effect are different, but the
name of the selected parameter will be shown between the parentheses on the
top line of the display. Parameters that can not be assigned to the sliders are
indicated by dashes (“--------”) instead of a parameter name.
Min (Minimum parameter value)
Range: 0 100
Controls: [CS4], [-1] [+1], Dial
Sets the lower limit of the [CS1] or [CS2] control range. A setting of “0”,
for example, means that when the slider is set to its lowest position the as-
signed parameter will also be set to its lowest value. A setting of “50” means
that the lowest slider position will set the assigned parameter to about 50% of
its range (a parameter with a range of 0 to 127, for example, would be set to
about 63).
If a controller is assigned to the “Min” parameter, an inverse “c” will
appear to the right of the parameter.