Filter
Top Products
90 VOICE EDIT MODE / 6:Controller
CS3 PARAMETER LIST (40 … 75)
40: “LFO_Wave ”
41: “LFO_Phase”
42: “LFO_SpdVel”
43: “LFO_SpdRnd”
44: “AEG_Rate1 ”
45: “AEG_Rate2 ”
46: “AEG_Rate3 ”
47: “AEG_Rate4 ”
48: “AEG_RlsRt ”
49: “AEG_Level2”
50: “AEG_Level3”
51: “AEG_LvlVel”
52: “AEG_RtVel ”
53: “FLT_Reso ”
54: “FLT_CofVel”
55: “FLT_ARVel ”
56: “FLT_Band ”
57: “FLT_CofFrq”
58: “FLT_Rate1 ”
59: “FLT_Rate2 ”
60: “FLT_Rate3 ”
61: “FLT_Rate4 ”
62: “FLT_RlsRt1”
63: “FLT_RlsRt2”
64: “FLT_Level0”
65: “FLT_Level1”
66: “FLT_Level2”
67: “FLT_Level3”
68: “FLT_Level4”
69: “FLT_RlsLv1”
70: “FLT_RlsLv2”
71: “OS_NoteSft”
72: “FLT_BPLvl1”
73: “FLT_BPLvl2”
74: “FLT_BPLvl3”
75: “FLT_BPLvl4”
The parameter assigned to [CS3] can also be controlled from an external
MIDI controller via MIDI control number 18. Operation of the [CS3] slider in
the VOICE or PERFORMANCE mode also transmits corresponding MIDI
control change data using control number 18.
Min.
Range: 0 … 100
Controls: [CS6], [-1] [+1], Dial
Sets the lower limit of the [CS3] control range. A setting of “0”, for exam-
ple, means that when the [CS3] slider is set to its lowest position the assigned
parameter will also be set to its lowest value. A setting of “50” means that the
lowest [CS3] position will set the assigned parameter to about 50% of its range
(a parameter with a range of 0 to 127, for example, would be set to about 63).
Max.
Range: 0 … 100
Controls: [CS8], [-1] [+1], Dial
Sets the upper limit of the [CS3] control range. A setting of “100”, for
example, means that when the [CS3] slider is set to its highest position the
assigned parameter will also be set to its highest value. A setting of “80”
means that the highest [CS3] position will set the assigned parameter to about
80% of its range (a parameter with a range of 0 to 127, for example, would be
set to about 102).