Yamaha SY85 Musical Instrument User Manual


 
183SONG EDIT MODE / SONG JOB
Combines the data from two different tracks and copies the result to a third track.
This job is not available when the rhythm track (track 9) is selected.
4: TRACK MIXDOWN
[SONG] [A]~[H] [SONG JOB] [MENU] 4:Track Mixdown [ENTER/YES]
From (From track 1 + track 2)
Range: 1 8
Controls: [CS6], [CS7], [-1] [+1], Dial
To
Range: 1 8
Controls: [CS8], [-1] [+1], Dial
Use the [CS6] slider to select the first “From” (source) track and the [CS7]
slider to select the second source track. The data from the first and second
source tracks will be combined and copied to the “To” (destination) track,
selected by the [CS8] slider.
Press [ENTER/YES] to begin the mixdown procedure. The following confir-
mation display will appear:
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8
Press [ENTER/YES] again to confirm that you want to go ahead with the
mixdown operation (which will overwrite all data in the “To” track), or press
[EXIT/NO] to cancel.
When the data has been mixed and copied, “Completed!” will appear briefly
on the display.
The mixdown function is most useful when you want to record more than 8
individual parts. Successfully recorded parts can be combined using this func-
tion, thus opening up more tracks for further recording. The data in the source
tracks is not erased during a mixdown operation.
Please note that if both source tracks are set to the same track number, the
data from that track will simply be copied to the destination track.