Filter
Top Products
151SONG EDIT MODE / MULTI EDIT
The ability to individually adjust the effect send level for each voice in a multi
setup allows the optimum amount of effect to be applied to each voice.
4: EFFECT SEND LEVEL
[SONG] → [MULTI EDIT] → [MENU] → 4:Effect Send Level → [ENTER/YES]
SendLevel
Range: 0 … 127
Controls: [SHIFT] + [ ]/[ ], [CS1] … [CS8], [-1] [+1], Dial
Only eight voice numbers are shown on the display at one time. Use the
PAGE [ ] and [ ] keys while holding the [SHIFT] key to switch between
multi instruments “1 … 8” and “9 … 16”. The currenty selected group of
voices is indicated on the upper display line.
Use the [CS1] through [CS8] sliders to adjust the effect send levels of
voices 1 through 8 or 9 through 16, respectively. The name of the currently
selected voice is shown in the upper right corner of the display. Voices that are
turned off are indicated by “---” on the display. A setting of “0” produces no
effect, while a setting of “127” produces maximum send level and therefore
maximum effect sound. The vertical bar graphs next to each parameter provide
a visual indication of send levels — the longer the bar the higher the send
level.
Please note that if the “Source” parameter in the “2: SEND SELECT &
LEVEL” screen (page 167) is set to “VCE” or “PFM” for any instrument, the
send level of that instrument cannot be changed. In this case “(vce)” will
appear on the display in place of the send level value.
F1
CS1
F2
CS2
F3
CS3
F4
CS4
F5
CS5
F6
CS6
F7
CS7
F8
CS8