Filter
Top Products
88
P1 SelSong: Selecting a song
1. SongNumber ............................[I, A…G/001…100]
Select the song.
The display shows the drive, song number, and
song name.
If a 24 bit song is selected, the display will indicate
“ .” If the song is protected, the display will indi-
cate “ ” (→p.60). If a song from a D16 playable
disk is selected, the display will indicate “ .”
Press the “ ” button, and you will be able to select
from a list. To select a different drive, select “Drive”
from this list.
You can also select songs by holding down the
[STOP] key and pressing the [FF] key or [REW] key.
1a. Drive ................................................... [I, A…G]
Select the drive.
When you press this button, a dialog box will
appear. Select the drive, and press the “OK” button.
(→p.22)
2. Select DispParameter............... [Tempo, Mark, Scene]
Select whether the LCD display will show the cur-
rent tempo, mark, or scene settings.
Press the “ ” button, and you will be able to select
from a list.
Tempo: The display will show the tempo source,
tempo, time signature, and rhythm of the song.
Mark: The display will show the number and name
of the mark at or immediately before the current
location in the song.
Scene: The display will show the number and name
of the scene for the current location in the song.
3. Rename ..................................................................
Select the “Rename” button, press the [ENTER] key
to access the dialog box, and modify the song name.
A name of up to sixteen characters can be input.
(→p.21)
4. New .......................................................................
This creates a new song following the last song of
the currently selected drive.
Press the “New” button to access the dialog box.
Set “SongType” and “MixerSet,” and press the
“OK” button, then press the [ENTER] key to create
the new song. If you press the “Cancel” button, no
song will be created.
4a. SongType............. [16Bit/12Track, 24Bit/6Track]
16Bit/12Track: Create a song for 16 bit recording/
playback. Tracks 1–12 can be used. A maximum of
four tracks can be recorded simultaneously.
24Bit/6Track: Create a song for 24 bit recording/
playback. Six tracks (1–6) can be used. Tracks 7–12
are not available. A maximum of four tracks can be
recorded simultaneously.
When audio data is transferred to a 16 bit song
(→p.81 EditType: “CopyTrack”), it will be handled
as 16 bit data.
The “SongType” (Bit/Track) setting can be changed
only when creating a new song.
4b. MixerSet .................................. [New, PrevSong]
Select the mixer settings for the new song.
New: New settings will be used.
PrevSong: The mixer settings of the currently
selected song will be used.
5. SONG
13
4
2
1
1a
4b4a