Korg KONTROL49 Musical Instrument User Manual


 
Operation–Setting mode
25
4
Use the main encoder to select the type of MIDI message.
NoAssign
No MIDI message will be assigned to the selected pad. If you select
NoAssign, the setting will be updated when you press the [ENTER]
key (blinking). (Step 14)
Note# (Note message)
Assigns a note message to the selected pad.
CtrlChg# (Control Change)
A control change message will be assigned to the switch. If you
selected CtrlChg#, select the control change number. (p.30
“Assigning a control change”
)
5
Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “Note
Select” (specify a note number) or “Control Change Select” (specify a
control change number).
6
Use the
main encoder
or the pads to select a note number or control
change number. The range is 0–127. (p.4 “About the trigger pad
functions–Input numerical values,” p.56 “Available MIDI messages”)
If you’re assigning a note message, press a note on the keyboard to
assign that note number to the current pad.
7
Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “MIDI
Channel” (specify the MIDI channel).
8
Use the main encoder or the pads to select the MIDI transmit channel.
The range is 1–16 (ch).
(
p.4
“About the trigger pad functions–Input
numerical values”)
9
Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “PAD
Type” (select the type of pad operation).
10
Use the main encoder to specify the type of operation that occurs when
you press the pad.
Momt (Momentary)
If a control change is assigned to the pad, pressing the pad will
transmit the assigned control change message with a value of 127, and
releasing it will transmit a value of 0.
If a note message is assigned to the pad, pressing the pad will transmit
a note-on, and releasing it will transmit a note-off.
Tgle (Toggle)
If a control change is assigned to the pad, the assigned MIDI message
will be transmitted alternately with a value of 127 and a value of 0 each
time you press the pad.
If a note message is assigned to the pad, a note-on message and a note-
off message will be transmitted alternately each time you press the
pad.
11
Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “Velocity
Type” (select the type of velocity).
12
Use the main encoder to select the velocity type.
VelSens (Velocity Sens)
The transmitted velocity value will depend on how strongly you strike
the pad. (If you choose VelSens, press the [ENTER] key (blinking) to
save the setting.)
(Green)(Green)
When assigning a control change
When assigning a note message
(Green)(Green)
(Green)(Green)
Settin
g
mode