Filter
Top Products
Operation–Setting mode
38
5
Press the OCTAVE SHIFT/CURSOR [®] key to move to “Pedal Type”
(select the type of pedal operation).
6
Use the main encoder to select the type of pedal operation.
Momt (Momentary)
The assigned MIDI message will be transmitted with a value of 127
when you press the pedal, and with a value of 0 when you release the
pedal.
Tgle (Toggle)
The assigned MIDI message will alternately be transmitted with a
value of 127 and a value of 0 each time you press the pedal.
7
Press the [ENTER] key.
The setting will be updated, and you will return to Play mode.
If you want to keep the changes you’ve made, save them in Scene mode.
If you turn off the power or select a different scene without saving, your
changes will be discarded. For details, see “Scene mode–[16] WRITE”
(☞p.55).
[12] KEYBOARD (Keyboard setting)
Here you can specify the MIDI channel, transposition, and velocity curve for
the note messages that are transmitted when you play the keyboard. The
velocity value of the note message transmitted when you strike a key can be
adjusted by a velocity curve, or can be a fixed value. You can choose one of
eight velocity curves or a fixed velocity value.
1
Hold down the [SETTING] key and press pad [12].
Now you can make Keyboard settings, and the [SETTING] key and
pad [12] will light. The main sensitivity indicates “MIDI Channel”
(MIDI channel setting).
2
Use the main encoder or the pads to select the MIDI channel on which
the MIDI message will be transmitted. The range is 1–16 (ch). (☞p.4
“About the trigger pad functions–Input numerical values”)
3
Press the OCTAVE SHIFT/CURSOR [®] key to move to “Transpose”
(transpose setting).
The transpose setting lets you shift the pitch of the keyboard in
semitone steps.
4
Use the main encoder or the pads to set the keyboard transpose setting.
The range is –24 – +24 (±2 octaves). (☞p.4 “About the trigger pad
functions–Input numerical values”)
(Green)(Green)
(Green)(Green)