Filter
Top Products
Operation–Scene mode
52
Scene mode
In Scene mode you can select and save scenes, load preset scenes, and
transmit and receive data dumps of individual scenes (or scene “sets”) to
and from a computer.
Scene mode is divided into five pages.
You can hold down the [SCENE] key and press a pad [1]–[16] to select the
scenes listed below or to move to a function page such as for saving a scene.
While you hold down the [SCENE] key, the pad of the currently selected
scene will blink. Then press one of the following pads to select a scene or
enter a page for saving a scene, etc. Alternatively, you can hold down the
[EXIT] key and press the [SCENE] key; the main display will indicate
“ScenePad?” and the KONTROL49 will wait for you to select a page (Mode
Lock). Now you can press a pad to select a page.
About the OCTAVE SHIFT/CURSOR keys, [ENTER]
key, and [EXIT] key
On the [13] MIDI Channel, [15] PRELOAD and [16] WRITE pages, you can
use the OCTAVE SHIFT/CURSOR [√]/[®] keys as cursor keys to move
between parameters.
When you press the [SCENE] key and a pad to enter one of these pages, the
key(s) for the direction(s) in which you can move will light green. You
cannot move in a direction in which the key is dark or lit red.
: You can move toward the right to another parameter
: You can move toward the left to another parameter
When you come to the last parameter in a page, the [ENTER] key will blink.
Press the [ENTER] key to execute the Load or Write operation and return to
Play mode. If you decide to cancel, press the [EXIT] key.
[1]–[12] Select Scene
Here’s how to select one of the scenes stored in the KONTROL49’s internal
memory.
1
Hold down the [SCENE] key and press the pad of the scene number
you want to use ([1]–[12]).
The pad will blink, and the main display will show the name of the
selected scene.
Release the [SCENE] key to return to Play mode.
When you turn on the power, the last-selected scene will be selected.
Be aware that if you have modified the settings of the currently selected
scene, re-selecting that scene will revert to the unmodified settings.
Loading a scene merely changes the internal settings of the
KONTROL49; it does not cause MIDI messages to be transmitted from
the USB connector or MIDI connector.
Never turn off the power while changing scenes; doing so may cause
the internal data to be damaged.
Pad No. Page Contents
Pad [1]–[12] Select Scene Select a scene from internal memory. (☞p.52)
Pad [13] MIDI Channel Specify the MIDI channel(☞p.53)
Pad [14] Dump Save/load scenes to/from a computer. (☞p.53)
Pad [15] Preload Load the preset scenes. (☞p.54)
Pad [16] Write Save a scene into internal memory. (☞p.55)
(GREEN)(RED)
(GREEN) (RED)