Filter
Top Products
Operation–Setting mode
43
If you want to keep the changes you’ve made, save them in Scene mode.
If you turn off the power or select a different scene without saving, your
changes will be discarded. For details, see “Scene mode–[16] WRITE”
(☞p.55).
■
BankSel (Bank Select message)
1
Use the main encoder or the pads to input the “MSB” value you want
to transmit. The range is 0–127. (☞p.4 “About the trigger pad
functions–Input numerical values”)
2
Press the OCTAVE SHIFT/CURSOR [®] key to move to “LSB” (specify
the LSB value).
3
Use the main encoder or the pads to input the “LSB” value you want to
transmit. The range is 0–127.
4
Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “MIDI
Channel” (specify the MIDI channel).
5
Use the main encoder or the pads to specify the MIDI channel on
which the bank select message will be transmitted. The range is 1–16
(ch).
6
Press the [ENTER] key to apply the settings.
If you decide to cancel, press the [EXIT] key to return to Play mode.
If you want to keep the changes you’ve made, save them in Scene mode.
If you turn off the power or select a different scene without saving, your
changes will be discarded. For details, see “Scene mode–[16] WRITE”
(☞p.55).
■
Free Mesg (Free message)
You can create and send your own MIDI messages. As an example, here’s
how to specify two messages; All Note Off [B0, 7B, 00] and Master Volume
Off (set the Master Volume to zero) [F0, 7F, 7F, 04, 01, 00, 00, F7].
1
Use the main encoder or the pads to specify the length (number of
bytes) for the message you want to transmit. The range is 1–32 (bytes).
In our example, the two messages total eleven bytes, so specify “11”
here. (☞p.4 “About the trigger pad functions–Input numerical
values”)
2
Press the OCTAVE SHIFT/CURSOR [®] key to proceed to specifying
the message(s).
(Green)(Red)
(Green)(Green)
(Green)(Green)
Settin
g
mode