Filter
Top Products
Operation–Setting mode
34
4
Use the main encoder to select the switch you want to assign.
"SW1"
"SW2"
5
Use the main encoder to select the MIDI message you want to assign.
NoAssign
No MIDI message will be assigned to the switch. If you choose
NoAssign, press the [ENTER] key (blinking) to apply the setting.
(☞Step 9)
Damper
Damper (CC#64) messages will be assigned to the switch.
Pressing the switch transmits a value of 127, and releasing it transmits
a value of 0.
In Play mode, the main display will indicate “Dampr--” when you
operate the switch.
Sostenut (Sostenuto)
Sostenuto (CC#66) messages will be assigned to the switch.
Pressing the switch transmits a value of 127, and releasing it transmits
a value of 0.
In Play mode, the main display will indicate “Sostn--” when you
operate the switch.
Soft (Soft Pedal)
Soft pedal (CC#67) messages will be assigned to the switch.
Pressing the switch transmits a value of 127, and releasing it transmits
a value of 0.
In Play mode, the main display will indicate “Soft--” when you operate
the switch.
Portmnt (Portamento)
Portamento (CC#65) messages will be assigned to the switch.
Pressing the switch transmits a value of 127, and releasing it transmits
a value of 0.
In Play mode, the main display will indicate “Porta--” when you
operate the switch.
CtrlChg# (Control Change)
A control change message will be assigned to the switch. If you choose
CtrlChg#, press the OCTAVE SHIFT/CURSOR [®] key to proceed to
“Control Change Select.” (☞p.37 “Assigning a control change”)
6
Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “MIDI
Channel” (specify the MIDI channel).
7
Use the main encoder or the pads to select the MIDI channel on which
the MIDI message will be transmitted. The range is 1–16 (ch). (☞p.4
“About the trigger pad functions–Input numerical values”)
8
Press the OCTAVE SHIFT/CURSOR [√] key to return to “SW1/SW2
Select,” and make settings in the same way for the other switch.
(☞Steps 4–7)
9
Press the [ENTER] key.
The setting will be updated, and you will return to Play mode.
If you want to keep the changes you’ve made, save them in Scene mode.
If you turn off the power or select a different scene without saving, your
changes will be discarded. For details, see “Scene mode–[16] WRITE”
(☞p.55).
(Green)(Green)