Filter
Top Products
Operation–Setting mode
40
[13] MAIN ENC (Main Encoder assignment)
Here you can assign a function to the main encoder.
Tempo change, program change, or program change with bank select can be
assigned to the main encoder.
1
Hold down the [SETTING] key and press pad [13].
Now you can make Main Encoder settings, and the [SETTING] key
and pad [13] will light. The main display indicates “Message Select”
(select a MIDI message).
2
Use the main encoder to select the MIDI message you want to assign.
NoAssign
No MIDI message will be assigned to the main encoder. If you choose
NoAssign, press the [ENTER] key (blinking) to apply the setting.
(☞Step 5)
TempoChg (Tempo Change)
Tempo change will be assigned to the main encoder. If you choose
TempoChg, press the [ENTER] key (blinking) to apply the setting.
(☞Step 5)
ProgChg (Program Change)
Program change will be assigned to the main encoder.
PChg&BS (Program Change & Bank Select)
Program change with bank select will be assigned to the main encoder.
By holding down the [SETTING] key while you turn the main encoder,
you can select whether to edit the bank select MSB or LSB. If you
choose PChg&BS, press the OCTAVE SHIFT/CURSOR [®] key to
move to “Assigning Program Change and Bank Select.” (☞“Assigning
Program Change and Bank Select”)
3
Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “MIDI
Channel” (specify the MIDI channel).
4
Use the main encoder or the pads to select the MIDI channel on which
the assigned MIDI message will be transmitted. The range is 1–16 (ch).
(☞p.4 “About the trigger pad functions–Input numerical values”)
5
Press the [ENTER] key.
The setting will be updated, and you will return to Play mode.
If you want to keep the changes you’ve made, save them in Scene mode.
If you turn off the power or select a different scene without saving, your
changes will be discarded. For details, see “Scene mode–[16] WRITE”
(☞p.55).
■
Assigning Program Change and Bank Select
If you chose Program Change and Bank Select, proceed to “MIDI Channel”
(set the MIDI channel).
1
Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “MIDI
Channel” (specify the MIDI channel).
2
Use the main encoder or the pads to select the MIDI channel on which
the MIDI message will be transmitted. The range is 1–16 (ch). (☞p.4
“About the trigger pad functions–Input numerical values”)
(Green)(Green)
(Green)(Green)