Filter
Top Products
Operation–Setting mode
31
2
Use the main encoder to select the MIDI message you want to assign.
NoAssign
No MIDI message will be assigned to the Mod Wheel controller. If you
select NoAssign, press the [ENTER] key to apply the setting. (☞Step 5)
A.Touch (AfterTouch)
Assign keyboard aftertouch. If you choose A.Touch, continue by
selecting the type of aftertouch. (☞p.29 “Assigning aftertouch”)
Velocity
Assign keyboard or pad velocity. If you choose Velocity, continue by
selecting the velocity type. (☞p.29 “Assigning velocity”)
CtrlChg# (Control Change)
A control change message will be assigned to the switch. If you
selected CtrlChg#, select the control change number. (☞p.30
“Assigning a control change”)
3
Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “MIDI
Channel” (specify the MIDI channel).
4
Use the main encoder or the pads to select the MIDI channel on which
the MIDI message will be transmitted. The range is 1–16 (ch). (☞p.4
“About the trigger pad functions–Input numerical values”)
5
Press the [ENTER] key.
The setting will be updated, and you will return to Play mode.
If you want to keep the changes you’ve made, save them in Scene mode.
If you turn off the power or select a different scene without saving, your
changes will be discarded. For details, see “Scene mode–[16] WRITE”
(☞p.55).
[7] VECTOR-X (Vector-X assignment)
Here you can assign a MIDI message to the X-axis of the vector joystick.
You can assign a control change (CC#) message to the X-axis of the vector
joystick.
1
Hold down the [SETTING] key and press pad [7].
Now you can specify the Vector-X assignment, and the [SETTING] key
and pad [7] will light. The main display indicates “Message Select”
(select the MIDI message).
2
Use the main encoder to select the MIDI message you want to assign.
NoAssign
No MIDI message will be assigned to the X-axis of the vector joystick.
If you choose NoAssign, press the [ENTER] key to apply the setting.
(☞Step 6)
CChg#000–127 (Control Change)
A control change message will be assigned to the switch.
3
Use the main encoder or pads to select the desired control change
number in a range of 0–127.
4
Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “MIDI
Channel” (specify the MIDI channel).
(Green)(Green)
(Green)(Green)
Settin
g
mode