Filter
Top Products
Operation–Message mode
50
[2] SNAP (Snapshot message)
This transmits the current values of the encoders and sliders (Snapshot
function). This is useful when you want to transmit the MIDI messages
assigned to the encoders and sliders so that they can be recorded at the
beginning of a song on your sequencer, or used as initial settings for your
DAW etc.
The Snapshot function transmits the current values for all of the
encoders and sliders at once.
1
In Play mode, set the encoders and sliders to the desired settings. The
sub-displays indicate the value while you are operating the controller.
2
Hold down the [MESSAGE] key and press pad [2].
Pad [2] will briefly go dark, and the encoder and slider values will be
transmitted. The main display will indicate “SNAP.”
Release the [MESSAGE] key to return to Play mode.
[3] NOTE OFF (All Note Off message)
This transmits an All Note Off [Bn, 7B, 00] message on all MIDI channels.
1
Hold down the [MESSAGE] key and press pad [3].
Pad [3] will briefly go dark, and an All Note Off message will be
transmitted on all MIDI channels. The main display will indicate
“NOTE OFF.”
Release the [MESSAGE] key to return to Play mode.
[4] GM ON (GM On message)
This transmits a GM System On [F0, 7E, 7F, 09, 01, F7] message.
1
Hold down the [MESSAGE] key and press pad [4].
Pad [4] will briefly go dark, and a GM System On message will be
transmitted. The main display will indicate “GM ON.”
Release the [MESSAGE] key to return to Play mode.
[5] STOP (Stop message)
This transmits the realtime message Stop [FC].
1
Hold down the [MESSAGE] key and press pad [5].
Pad [5] will briefly go dark, and the realtime message Stop will be
transmitted. The main display will indicate “STOP.”
Release the [MESSAGE] key to return to Play mode.