Filter
Top Products
Operation–Setting mode
36
5
Press the [ENTER] key.
The setting will be updated, and you will return to Play mode.
If you want to keep the changes you’ve made, save them in Scene mode.
If you turn off the power or select a different scene without saving, your
changes will be discarded. For details, see “Scene mode–[16] WRITE”
(☞p.55).
■
Assigning a control change
If you chose CtrlChg# for “Message Select,” you’ll need to use “Control
Change Select” to select the control change, and then proceed to “MIDI
Channel” (select the MIDI channel).
1
Press the OCTAVE SHIFT/CURSOR [®] key to move to “Control
Change Select” (select the control change number).
2
Use the main encoder or pads to select the desired control change
number in a range of 0–127.
3
Press the OCTAVE SHIFT/CURSOR [®] key to proceed to “MIDI
Channel” (specify the MIDI channel).
4
Use the main encoder or the pads to select the MIDI transmit channel.
The range is 1–16 (ch).
5
Press the [ENTER] key.
The setting will be updated, and you will return to Play mode.
If you want to keep the changes you’ve made, save them in Scene mode.
If you turn off the power or select a different scene without saving, your
changes will be discarded. For details, see “Scene mode–[16] WRITE”
(☞p.55).
[11] FOOT SW (Foot SW assignment)
Here you can assign a MIDI message to a foot switch or damper pedal
connected to the rear panel SWITCH jack, and specify the MIDI
transmission channel.
You can assign damper, sostenuto, soft pedal, portamento, or control change
(CC#) messages to the foot switch.
1
Hold down the [SETTING] key and press pad [11].
Now you can make pedal assignments, and the [SETTING] key and
pad [11] will light. The main display indicates “Message Select” (select
the MIDI message).
2
Use the main encoder to select the MIDI message you want to assign.
NoAssign
No MIDI message will be assigned to the foot switch. If you choose
NoAssign, press the [ENTER] key (blinking) to apply the setting.
(☞Step 5)
Damper
Damper (CC#64) messages will be assigned to the foot switch.
Pressing the foot switch transmits a value of 127, and releasing it
transmits a value of 0.
In Play mode, the main display will indicate “Dampr--” when you
operate the foot switch.
(Green)(Red)
(Green)(Green)