Filter
Top Products
13
1. Parts and their functions
KEY ON button [KEY ON]
This is used to combine key materials for the
transition duration which has been set.
Press the button.
Blinks
Image combining is
now underway.
Image combining is
now disabled.
Lights
The button
indicator goes off.
Images can no
longer be combined.
Press the button.
Image combining
is now completed.
Lights
By turning the OSD/TIME dial () while keeping
the KEY ON button pressed after the button has
been held down, the transition duration can be
changed.
FTB ON button [FTB ON]
Press this button to fade out the program image to
a black screen for the transition duration which has
been set.
When the button is pressed again, the program
image is faded in from the black screen.
Press the button.
Blinks
Now fading out.
Now fading in.
Lights
The button
indicator goes off.
Program image
Press the button.
Fade-out is now
completed.
Lights
An image other than the black screen can be set
as the screen to which the program image is to be
faded out.
Refer to “1-5. FTB (fade to black)” (<Operations
and Settings> Operating Instructions).
By turning the OSD/TIME dial () while keeping
the FTB ON button pressed after the button has
been held down, the transition duration can be
changed.
CUT button [BKGD CUT]
This instantly initiates a transition for the currently
selected operation.
Button indicator ON:
The transition is being executed.
Button indicator OFF:
The transition is complete.
AUTO button [BKGD AUTO]
This automatically initiates the transition for the
transition duration which has been set. (Auto
transition)
Button indicator ON:
Auto transition is being executed.
Button indicator OFF:
Auto transition is complete.
If the AUTO button is pressed while auto transition
is being executed, the auto transition operation is
aborted.
When the button is pressed again after the
operation was aborted, the remaining transition is
executed.
When the AUTO button is pressed with the slide
lever () at a midway setting, the transition is
executed in the remaining time from the midway
status.
By turning the OSD/TIME dial () while keeping
the AUTO button pressed after the button has been
held down, the transition duration can be changed.
Slide lever
This is used when executing transitions manually.
When the slide lever is moved to the end, the
transition is completed.
If it has been moved while an auto transition was
being executed, operation will switch to manual as
soon as the position of the slide lever has gone
beyond the amount of the transition having been
executed.
It is possible to select a background, key or PinP
using a menu for materials involving transitions.