Filter
Top Products
28
3. Basic operations
3-1-4. Selecting the bus mode
The bus mode can be set by the following menu operations.
[13] Operation Menu
5. Bus Mode
A/B bus:
When the slide lever is at side A, the signals selected by
the A bus are output as PGM images.
When the slide lever is at side B, the signals selected by
the B bus are output as PGM images.
PGM (A)/PST (B):
Using a flip-flop system, the signals selected by the A
bus are always output as PGM images, and the signals
selected by the B bus are always output as PST images.
PGM (B)/PST (A):
Using a flip-flop system, the signals selected by the B
bus are always output as PGM images, and the signals
selected by the A bus are always output as PST images.
3-1-5. Selecting the transition type
Use the MIX button and WIPE button to select the
background transition mode.
3-1-6. Manual transitions
Operate the slide lever to execute transitions manually.
If the slide lever is moved while an auto transition is
executed, operation will switch to manual as soon as the
position of the slide lever has gone beyond the amount of
the transition which has been executed.
The bus tally indicators on the left of the lever show the
program bus output statuses.
When only indicator A is lighted:
A bus output
When both indicators A and B are lighted:
Transition underway
When only indicator B is lighted:
B bus output
<Setting the slide lever function>
[13] Operation Menu
7. Slide Lever
Any of the following materials for which the transition is to be
executed can be set by operating the slide lever.
BKGD, Key, PinP, NoAsign