Filter
Top Products
28
2. Preparations
2-5-6. Direct operations using the USER buttons and OSD/TIME dial
The functions that have been assigned to the USER buttons are displayed in the USER button status display area,
and the setting itemes which can be operated directly using the USER buttons and OSD/TIME dial are displayed
in the states listed below.
When this happens, the functions assigned to the USER buttons are disabled.
When the chroma key marker is displayed
When the submenu [2] WIPE Menu is displayed
When the submenu [3] PinP Menu is displayed
When the submenu [5] KEY Adjust Menu is displayed
When a particular USER button is pressed at this time, the status in which to change the settings shown in the
status area is established, and the value concerned can be changed by turning the OSD/TIME dial.
The values that have been changed are reflected instantly.
U1: USER 1 button
U2: USER 2 button
U3: USER 3 button (SHIFT button + USER 1 button)
U4: USER 4 button (SHIFT button + USER 2 button)
Example: When [2] WIPE Menu is displayed
2CVVGTP
&KTGEVKQP 04
$QTFGT5QHV $^5
5GV$QTFGT%QN 9JKVG
#FL$QTFGT%QN
*^5^.
2QUKVKQP :^;^
5GV6Q2TGUGV
72QU:72QU;77
=?9+2'/GPW
2CVVGTP
&KTGEVKQP 04
$QTFGT5QHV $^5
5GV$QTFGT%QN 9JKVG
#FL$QTFGT%QN
*^5^.
2QUKVKQP :^;^
5GV6Q2TGUGV
72QU:72QU;77
=?9+2'/GPW
2CVVGTP
&KTGEVKQP 04
$QTFGT5QHV $^5
5GV$QTFGT%QN 9JKVG
#FL$QTFGT%QN
*^5^.
2QUKVKQP :^;^
5GV6Q2TGUGV
72QU:72QU;77
=?9+2'/GPW
2CVVGTP
&KTGEVKQP 04
$QTFGT5QHV $^5
5GV$QTFGT%QN 9JKVG
#FL$QTFGT%QN *^5^.
2QUKVKQP :^;^
5GV6Q2TGUGV
72QU:72QU;77
=?9+2'/GPW
The value of “B” for the 3. Border/Soft item has been set.
The “B” value is blinking.
The “X” value is changed, and it is
reflected instantly.
The USER 1 button indicator goes off, the direct
operation is canceled, and operation returns to the
3. Border/Soft item setting.
The value stops blinking.
The state in which the value (Pos-X)
of “X” for the 6. Position item can be
changed is now established.
The indicator of the USER 1 button lights.
Press the USER 1 button.
Press the USER 1 button.
Turn the OSD/TIME dial to change
the value.
The cursor moves
to the last line that
displays the USER
button status.