Filter
Top Products
78
No. Sub menu Setting item Setting
7 MultiView Pattern Menu 1 Split Setting range 4Split, 5-aSplit, 5-bSplit, 9Split, 10-aSplit, 10-bSplit
Initial value 10-aSplit
2 Pos1 Source Setting range SDI-IN1 to 4(Input Name), DVI-IN(Input Name), FMEM1, FMEM2,
CBGD, CBAR, Black, NoAsign
Initial value PGM
3 Pos2 Source Setting range SDI-IN1 to 4(Input Name), DVI-IN(Input Name), FMEM1, FMEM2,
CBGD, CBAR, Black, NoAsign
Initial value PVW
4 Pos3 Source Setting range SDI-IN1 to 4(Input Name), DVI-IN(Input Name), FMEM1, FMEM2,
CBGD, CBAR, Black, NoAsign
Initial value Input1(Input Name)
5 Pos4 Source Setting range SDI-IN1 to 4 (Input Name), DVI-IN(Input Name), FMEM1, FMEM2,
CBGD, CBAR, Black, NoAsign
Initial value Input2(Input Name)
6 Pos5 Source Setting range SDI-IN1 to 4 (Input Name), DVI-IN(Input Name), FMEM1, FMEM2,
CBGD, CBAR, Black, NoAsign
Initial value Input3(Input Name)
7 Pos6 Source Setting range SDI-IN1 to 4(Input Name), DVI-IN(Input Name), FMEM1, FMEM2,
CBGD, CBAR, Black, NoAsign
Initial value Input4(Input Name)
8 Pos7 Source Setting range SDI-IN1 to 4(Input Name), DVI-IN(Input Name), FMEM1, FMEM2,
CBGD, CBAR, Black, NoAsign
Initial value DVI-D(Input Name)
9 Pos8 Source Setting range SDI-IN1 to 4(Input Name), DVI-IN(Input Name), FMEM1, FMEM2,
CBGD, CBAR, Black, NoAsign
Initial value FMEM1
10 Pos9 Source Setting range SDI-IN1 to 4(Input Name), DVI-IN(Input Name), FMEM1, FMEM2,
CBGD, CBAR, Black, NoAsign
Initial value FMEM2
11 Pos10 Source Setting range SDI-IN1 to 4(Input Name), DVI-IN(Input Name), FMEM1, FMEM2,
CBGD, CBAR, Black, NoAsign
Initial value AUX
8 MultiView Out/Frame Menu 1 Frame Setting range LUM0%, LUM25%, LUM50%, LUM75%, LUM100%, Off
Initial value LUM75%
2 Character Setting range LUM0%, LUM25%, LUM50%, LUM75%, LUM100%, Off
Initial value LUM75%
3 Label Setting range On, Off
Initial value On
4 Tally Setting range Red, Red+Green, Off
Initial value Red+Green
5 Level Meter Setting range On, Off
Initial value Off
6 Input Status Setting range On, Off
Initial value On
9 XPT SW Assign Menu 1 XPT1 Setting range SDI-IN1 to 4(Input Name), DVI-IN(Input Name), FMEM1, FMEM2,
CBGD, CBAR, Black, NoAsign
Initial value SDI-IN1(Input Name)
2 XPT2 Setting range SDI-IN1 to 4(Input Name), DVI-IN(Input Name), FMEM1, FMEM2,
CBGD, CBAR, Black, NoAsign
Initial value SDI-IN2(Input Name)
3 XPT3 Setting range SDI-IN1 to 4(Input Name), DVI-IN(Input Name), FMEM1, FMEM2,
CBGD, CBAR, Black, NoAsign
Initial value SDI-IN3(Input Name)
4 XPT4 Setting range SDI-IN1 to 4(Input Name), DVI-IN(Input Name), FMEM1, FMEM2,
CBGD, CBAR, Black, NoAsign
Initial value SDI-IN4(Input Name)
9. Setting menu tables