Filter
Top Products
43
3. Basic operations
3-4-5. Effect dissolve
This function enables one effect to be switched to another
smoothly when the data in the preset memory where the
PinP image settings were registered is called using the
USER buttons.
p Before using the function, set the transition duration and
either enable or disable for effect dissolve using the menu
below.
[1] TIME/CBGD Menu
8. PinP EFFDSLV
<Items covered by effect dissolve>
p Image position (X, Y)
p Image size
p Border width
p Border color
p Soft effect amount
p Trimming setting
<Selecting the Dot by Dot mode>
If an SD format image is used as the PinP material when
the system is operating in an HD mode, images can be
combined in the Dot by Dot mode (actual size images).
In this mode, the SD format images are not up-converted so
image deterioration can be prevented.
[10] Input Menu
1. Mode
Normal:
The input signals in conformity with the system format
are enabled.
DbyD:
The images are combined in the Dot by Dot mode
(actual size images).
SD HD
SD
PinP material
PinP combined images