Filter
Top Products
48
3. Basic operations
3-9-2. Saving images in the flash
The data of the images stored in the frame memories can be
retained even when the unit’s power is turned off by saving
it in the flash memory area which is incorporated inside the
unit.
Whether to automatically save the image data stored in the
frame memories or save it manually is set when the data is
to be transferred from the AUX bus.
[12] USER/FMEM Menu
7. FMEM Mode
M (Mode):
This is used to set the method of storing the image data
in the flash memory area.
Auto: The images are stored automatically.
Manual: The images are stored manually.
Ex (Exec):
This is for importing the still images into the flash memory
area.
When the OSD/TIME dial is pressed, the image data in
the frame memory is stored in the flash memory area.
p This takes effect when “Manual” has been selecting as
the M (Mode) setting.
p When data is being written in the flash memory area,
a “now writing” message is displayed on the PVW
images.
Do not turn off the power while this message is
displayed.
Note