Filter
Top Products
23
2. Preparations
2-5. OSD (on-screen display) menu
operations
The unit’s settings are selected using the OSD menus which
are displayed on the external monitor.
Described here is how to operate the OSD menus.
2-5-1. Displaying and clearing the OSD
menus
qBasic operations
When the OSD ON button is held down, the OSD ON button
indicator lights, and the OSD menus are displayed on the
external monitor.
When the OSD ON button is held down while an OSD menu
is displayed, the OSD ON button indicator goes off, and the
OSD menu display is cleared.
qChanging the connector for outputting
the OSD menus
15&176 5&+176&8+176
15&5K\G (WNN
15&$CEM 1P
-G[2TKQTKV[ 2KP2QXGT-';
$75/QFG 2)/#256$
6KOG7PKV 5GE(TCOG
5NKFG.GXGT $-)&
)2++PRWV 'PCDNG
)2+1WVRWV 'PCDNG
%CO%QPV.KPM 1HH
Ť
=?1RGTCVKQP/GPW
The OSD menu output connector can be changed using the
“1. OSD OUT” item on the [13] Operation Menu.
SDI-OUT2:
The menus are output from the SDI OUT 2 connector.
DVI-OUT:
The menus are output from the DVI OUT connector.
SDI-OUT2+DVI-OUT:
The menus are output from both the SDI OUT 2
connector and DVI OUT connector.
q How to forcibly display the OSD menus
When the OSD ON button is held down while holding down
the SHIFT button, the following settings are established
automatically.
p The OSD ON button indicator lights, and the OSD menus
are displayed on the external monitor.
p The output destination of the OSD menus is set to both
the SDI OUT 2 connector and DVI OUT connector.
p The screen size of the OSD menus output from the DVI
OUT connector is set to Auto.
(The menus are output in the size that corresponds to the
input specifications of the PC monitor which is connected
to the unit.)