Panasonic AW-HS50N Music Mixer User Manual


 
8
Characteristics
Function for linkup with a camera integrated with a
pan-tilt head and remote camera controller using IP
connection
p The unit can be connected to a Panasonic camera
with an integrated pan-tilt head and a remote camera
controller using a network.
By linking it with a remote camera controller, it is possible
to put together a highly efficient operating environment.
Supported camera integrated with a pan-tilt head:
AW-HE50
Supported remote camera controller:
AW-RP50
Only one switcher (the unit) can be linked with a remote
camera controller.
[Display of camera information]
The camera setting information (iris, gain and so on)
obtained by the AW-RP50 can be displayed in the AUX
output or on the split screens of multi view display.
[Transmission of tally information]
The unit’s ON AIR tally information can be sent to the
AW-RP50.
[Switching of materials]
The bus materials of the switcher (the unit) can be
selected from the AW-RP50.
They can be switched in tandem with the selection of
the camera using the AW-RP50.
(Control buses supported: AUX, PVW, PinP, KEY-F)
[Focus assist function]
By operating the buttons on the AW-RP50, it is
possible to switch to the multi view display screen from
the full screen display of the camera images.
(Control bus supported: AUX)
[Control using PAN/TILT lever and ZOOM button]
The PAN/TILT lever and ZOOM button on the
AW-RP50 can be used to change the parameters of
the switcher (the unit).