Filter
Top Products
46
3. Basic operations
3-8. Setting the USER buttons
Menu item functions can be assigned to the USER 1[3]
button and USER 2[4] button for use later.
Up to four functions can be assigned from USER1 to
USER4.
75'4 2KP22TGUGV
75'4
75'4
75'4
(/'/5'.'%6 (/'/
#7:6Q(/'/ 4X1HH^':10
(/'//QFG /#761^':10
=?75'4(/'//GPW
The functions registered in [USER1] and [USER3] are
assigned to the USER 1 button, and the functions registered
in [USER2] and [USER4] are assigned to the USER 2
button.
While the SHIFT button is pressed, the function registered in
[USER3] or [USER4] can be selected.
The button indicator is lighted when the functions assigned
to the button are enabled, and it is off when the functions
are disabled.
Each time a USER button is pressed, its functions are
switched between enabled and disabled.
The following functions can be assigned to the USER buttons (USER 1 and USER 2).
No. Item Function
1 PinP Preset This item can be set in the [USER1] only.
When it is set, [USER1] to [USER4] can all be used for registering the data in the PinP preset
memories and calling it from the memories.
2 WIPE Preset This item can be set in the [USER1] only.
This item can be set in [USER1] only.
When it is set, [USER1] to [USER4] can all be used for registering the data in the WIPE preset
memories and calling it from the memories.
3 PinPPVW The PinP image is output to the PVW image.
4 KeyPVW KEY is output to the PVW image.
5 GPI Input The GPI input is enabled or disabled.
6 GPI Output The GPI output is enabled or disabled.
7 CamCont Link Link control with the AW-RP50 is set to ON or OFF.
8 AUX Transition The AUX transitions are enabled or disabled.
9 PinP Transition The PinP transitions are enabled or disabled.
10 EFFDSLV Time Effect dissolve is enabled or disabled.
11 StrFMEM1 The images of the AUX bus are imported into the frame memory (FMEM1).
12 StrFMEM2 The images of the AUX bus are imported into the frame memory (FMEM2).
13 No Asign No item assigned
Even when functions have been assigned to the USER buttons, the assigned function will be disabled and the image setting
operations will take priority in the following situations.
<Displaying the chroma key markers>
USER1: X, USER2: Y,
USER3: Size, USER4: Aspect
<Displaying the [2] WIPE Menu submenu>
USER1: WIPEPos X, USER2: WIPEPos Y,
USER3: —, USER4: —
<Displaying the [3] PinP Menu submenu>
USER1: PinP X, USER2: PinP Y,
USER3: PinP Size, USER4: —
<Displaying the [5] KEY Adjust Menu submenu>
USER1: Mask Left, USER2: Mask Right,
USER3: Mask Top, USER4: Mask Bottom