Filter
Top Products
21
2. Preparations
2-3. Turning the unit’s power on and
off
w Turning on the power
1 Set the POWER switch to the ON position.
When power is supplied to the unit, the POWER
indicator lights up green.
w Turning off the power
1 Set the POWER switch to the OFF position.
The unit’s power is turned off, and the POWER indicator
goes off.
2-4. Checking the video output
Described below are the steps taken to display the unit’s
OSD menu on an external monitor to check the unit’s video
output.
2-4-1. Displaying the OSD menus on a PC
monitor
1 Connect the PC monitor to the unit’s DVI OUT
connector.
2 Turn on the power of the PC monitor.
3 Turn on the power of the unit.
4 Hold down the OSD ON button.
The OSD ON button indicator lights, and the OSD
menus are displayed on the PC monitor.
If the OSD menus do not appear on the monitor, refer to
“How to forcibly display the OSD menus”.
If the OSD menu fails to appear on the PC monitor even
after the above steps have been taken, it may mean that
the PC monitor does not support the unit’s DVI output
format.
Check the input specifications of the PC monitor.
Note