Filter
Top Products
60
5. Setting the multi view display
5-2. Setting the split frames and
characters
The frames, character luminance and background to be
used for the split screens can be set.
The settings are selected on the [8] MultiView Out/Frame
Menu of the OSD menu.
(TCOG .7/
%JCTCEVGT .7/
.CDGN 1P
6CNN[ 4GF)TGGP
.GXGN/GVGT 1HH
+PRWV5CVWU 1P
=?/WNVK8KGY1WV(TCOG/GPW
[8] MultiView Out/Frame Menu
1. Frame
This is used to set the split frame brightness and, if the
frame is to be displayed, to decide whether the split frames
are to be displayed.
LUM (0%, 25%, 50%, 75%, 100%):
The split frame (gray scale) luminance is set.
Off:
The split frame is not displayed.
[8] MultiView Out/Frame Menu
2. Character
This is used to set the character brightness and, if the frame
is to be displayed, decide whether the characters are to be
displayed.
LUM (0%, 25%, 50%, 75%, 100%):
The character (gray scale) luminance is set.
Off:
The characters are not displayed.
p If the input signals have been frozen, an “F” mark is
displayed in front of the material names.
[8] MultiView Out/Frame Menu
3. Label
This is used to decide whether to display the character
background (half tones).
On: The character background is displayed.
Off: The character background is not displayed.
5-3. Setting the tally displays
The tally displays to be superimposed onto the split screen
frames can be set.
The red tally indicates the material consisting of program
outputs.
The green tally indicates the material selected by the preset
bus.
If frames are displayed, the red tally or green tally is
displayed on the frames.
If the frames are not displayed, the red tally and green tally
are displayed on the left of the material names.
[8] MultiView Out/Frame Menu
4. Tally
This is used to set the tally displays.
Red+GRN:
Both the red tally and green tally are displayed.
Red: Only the red tally is displayed.
Off: No tally displays are shown.
p The red tally signals are output from the unit’s TALLY/
GPI connector.
p The red tally is not displayed during FTB operations
while the program images have been completely faded
out to a black screen.
During times like this, the green tally is displayed for
images consisting of program images.
However, the red tally will be displayed if FMEM1,
FMEM2 or CBGD has been selected using the menu
item below.
[1] TIME/CBGD Menu
5. FTB Source