Filter
Top Products
52
4. Input/output signal settings
4-1-5. Freezing and canceling the freezing
of the input images
[10.1] Input Menu/SDI-IN1
3. Freeze
[10.2] Input Menu/SDI-IN2
3. Freeze
[10.3] Input Menu/SDI-IN3
3. Freeze
[10.4] Input Menu/SDI-IN4
3. Freeze
[10.5] Input Menu/DVI-IN
1. Freeze
These are used to freeze the SDI input signal images or
cancel the freezing of these images.
On: The images are frozen.
Off: The image freezing is canceled.
p When the multi view display is used to show the input
signals of frozen images, the “F” mark appears in front
of the material names.
4-1-6. Setting the video process function
The video process function works for all the SDI input signal
images.
The color tones can be changed on an image by image
basis.
The “VPrc/YGain/Ped” and “VPrc:CGain/Hue” items are
used to change them.
VPrc/YGain/Ped VPrc This is used to enable or disable the
video process function.
On: Function enabled
Off: Function disabled
YGain This is used to set the gain of the Y
signal.
0.0 to 200.0
Ped This is used to set the pedestal level
value.
–20.0 to 20.0
VPrc:CGain/Hue CGain This is used to set the gain value of the
saturation.
0.0 to 200.0
Hue This is used to set the amount of change
in the hue.
0.0 to 359.9
4-1-7. Setting the up-converter
This unit features an up-converter function.
The up-converter is set on the SDI-IN3 and SDI-IN4 menus.
[10.3] Input Menu/SDI-IN3
8. UC:Scale/ECPos
[10.4] Input Menu/SDI-IN4
8. UC:Scale/ECPos
Scale: “SQ,” “EC” or “LB” is set as the scaling method.
Input image SQ EC LB
SQ
(squeeze)
The image is enlarged both horizontally and
vertically to fill the entire screen.
EC
(edge crop)
The aspect ratio of the image is maintained,
the image size is increased in accordance with
the vertical resolution, and black bands are
added at the left and right.
LB
(letter box)
The aspect ratio of the image is maintained,
the image size is increased in accordance
with the horizontal resolution, and the image is
cropped at the top and bottom.
ECPos: The image position is finely adjusted.
This can be set only when “EC” (edge crop) has
been selected as the Scale setting.
Center The image is positioned in the center, and black
images are added at the left and right.
Right The image is positioned at the right, and a black
image is added at the left.
Left The image is positioned at the left, and a black
image is added at the right.
[10.3] Input Menu/SDI-IN3
9. UC:Size
[10.4] Input Menu/SDI-IN4
9. UC:Size
The size of the up-converted input image is adjusted using a
percentage from 0 % to 10 %.