Filter
Top Products
63
6. System settings
6-1-2. Setting the ancillary data
A function for allowing the V ancillary data and embedded
audio data of the SDI input signals to pass through can be
set.
When an HD format is used:
The ancillary data starting with line 9 is allowed to
pass through.
When an SD format is used:
The ancillary data starting with line 12 is allowed to
pass through.
p If SD format signals are input while the HD format has
been set as the system format, it will not be possible to
allow the ancillary data and embedded audio data to
pass through.
[14] SYSTEM Menu
4. AUX Anci
On: The ancillary data and embedded audio data of the
SDI input materials selected by the AUX bus are
allowed to pass through.
Off: The ancillary data and embedded audio data are not
allowed to pass through.
p The data is not allowed to pass through when KEY
OUT or CLN material has been selected.
[14] SYSTEM Menu
5. PGM Anci
On: The ancillary data and embedded audio data of the
SDI input materials selected by the PGM bus are
allowed to pass through.
Off: The ancillary data and embedded audio data are not
allowed to pass through.
[14] SYSTEM Menu
6. PVW Anci
On: The ancillary data and embedded audio data of the
SDI input materials selected by the PST bus are
allowed to pass through.
Off: The ancillary data and embedded audio data are not
allowed to pass through.
[14] SYSTEM Menu
7. MV Anci
PGM: The ancillary data and embedded audio data of the
SDI input materials selected by the PGM bus are
allowed to pass through.
PVW: The ancillary data and embedded audio data of the
SDI input materials selected by the PST bus are
allowed to pass through.
Off: The ancillary data and embedded audio data are not
allowed to pass through.