Filter
Top Products
33
3. Basic operations
3-3-3. Selecting the key materials
Select the key materials using the A bus and B bus
crosspoint buttons.
1 Press the KEY-F/S button to set the crosspoint
buttons to the key bus material selection
mode.
2 Select the key fill signal using the B bus
crosspoint buttons.
3 Select the key source signal using the A bus
crosspoint buttons.
4 Press the KEY-F/S button to release the bus
selection mode of the crosspoint buttons.
PinP ONWIPEMIX
TRANSITION TYPE
KEY-F/SPinPAUX
KEY-S
AUX
PGM
61
PVW
72
KEY OUT
83
CLN
94
MV
A
SHIFT
CUT
AUTO
BKGD
B
SHIFT
KEY-F
PinP
AUX
105
BUS DELEGATION
KEY ON FTB ON
2
1, 43
3-3-4. Key transition
When the KEY ON button is pressed, the key transitions
(fades in) for the transition duration which has been set.
<Setting the transition duration>
[1] TIME/CBGD Menu
3. KEY Time
p The transition duration can also be changed by turning
the OSD/TIME dial while pressing the KEY ON button.
When the KEY ON button is held down, the duration
setting is displayed on the OSD menu so the setting can
now be changed while checking what is displayed.
The key transition can also be executed by operating the
slide lever.
<Selecting the slide lever operation>
[13] Operation Menu
7. Slide Lever